Use 2×4basics table outdoors, sand, and your 2×4, you can custom build a sturdy patio, porch or deck table up to 8 feet (2. 4m). It's easy! Simple assembly with only a screwdriver and a saw. Only straight cuts up to 90 degrees are necessary – no tabs or corners. If you want rounded corners, is a downloadable template cutting practice on our website available. All hardware is included. Resin without the maintenance and upkeep of the entire structure-made time-frame is designed for long life. The modular system table is 29 inches (737 mm) high and wide, 30 inches (767 mm). You choose the length. Sand in color. Try dining table with 2×4basics combine other outdoor furniture, such as creating AnySize President AnySize table, flip top bench table, or groups of functional and attractive furniture.
Buy 2×4basics 12319 AnySize Outdoor Dining Table Legs , Sand

5 Responses to “2×4basics 12319 AnySize Outdoor Dining Table Legs , Sand”

1. Rueg on November 14th, 2009 5:49 am

   This kit is awful – compared to other kits. With the standard kit you get 5 boards – 3 for the table and 2 benches. From this table and two benches, you have the time with 20 boards a waste! Clean 20 boards. Stain or paint 20 boards. Align 20 boards. And cut 4 boards to a different length, then the others. And to try, 20 2×4 received that are perfectly straight is a wasted effort. I think the picture does not look nice, but it's not worth the trouble and the other kits to work picnic table in the comparison. The reason I bought this set for a portion of the resin. The picnic table, this place is standard 5 boards with metal frame, but after about 20 years, is the framework, weak and can not sit. Otherwise, the wood is still good. I think I do not understand why we could use a larger plate measured with this kit resin frame – just to make sure that they fit properly. When I learn more I would just buy the kit were getting 5th I have 2 different types of screws with this kit – a kind of table and another type (ordinary flathead screws) for the benches. One might think that they are not the same, right? I have the picnic table with my parents when I was a child (standard 5-card was with a metal frame) and are not the problems I had with this configuration. Messing with all the 2×4 is just not updated peine.Mise – a few more things. The flat-head screws that come with the bank, are 2 ", so if you do not grow at an angle, you can come out of the woods on the other side. Directions diagram show the screws go into a corner, but there are no written instructions (with the benches, the table written directions and any directions chart), I just wanted to report it so that others will not get at the moment. I have no problem, since I in one corner. Also – shame on you Amazon for placing shipping labels directly on the approach chart – on both packages! If the shipping labels tear without removing directions chart. Also consider the long term – when it comes to re-paint/stain you either blow up the air in between the boards, or have them removed. I would never buy this set again and wish I had still update pas.8/28/08 – to. I ordered a bank to do what someone else did and executed – in the middle of each bench support supoort and support fixed things. I tell you to (if you had the misfortune) to buy this set. My bank was only 6 feet long, but still had oscillations (probably) cheap because of the flat head screw. How to buy 2 seats for you and 3 of the Bank under gap between the two media centers. With this bench, I received the VIS OK! The shortest, money, bigger screws – they offer so much better! The 2 "deck screws I received with the other two benches are just the standard ugly 2" deck screws if you do not mind dril in a corner you can find all of the way lay through the forest. The heads of these operations are also much smaller, so they do not provide very good and in some cases are small enough to fit into / through the cracks in the plastic. It would have been nice to get the right screw with everything. I have $ 181. 21 to 3 benches, 1 table, wood, a gallon of stain and a couple of extremely cheap / disposable brush. Not worth the money or time. I always recommend this kit, they can not even include the appropriate screws. There are far cheaper kits that are much easier to put together and come with appropriate equipment.
   Rating: 2 / 5

2. JoelNale on November 14th, 2009 6:04 am

   Build your own garden furniture. Although it sounds like a good idea to be aware of the costs involved and the longevity of the product. [. . . ] Total: [. . . ] – Assuming that you do not make mistakes, and that the cost is for the 2×4 in this area. The problem I have with this is twofold: 1 2×4 are not waterproof. When they warp and crack and re-paint. I do not want to view, print, for obvious reasons, and anything beyond that will be treated Redwood (cedar wood, or plastic composite panels, incredibly expensive). At that time, the price of this project will compete with your patio tables aluminium.2. Maintenance – you have to dye / weather every year. These additional costs for the maintenance of the element. Summary: Nice idea in theory. I like to invest building things, but you keep your money and even more in an all aluminum patio table, and no longer require constant maintenance.
   Rating: 2 / 5

3. Franklin M. Sterni on November 14th, 2009 7:15 am

   I use this table outside of my inside plants, try freezing, having had the summer holidays at home, I print 2×4's treated. . . I have a coat of stain, if it ever pleut.ce table is finished simply put it together when you cut leaves a 2×4, and sink a few screws. . . Pre-drilling screw holes make work easier. . .
   Rating: 5 / 5

4. N. Patel on November 14th, 2009 9:56 am

   I bought it because we are before buying an outdoor furniture in a good game, which can cost up to about $ 800 for the type of furniture that we aimons.La plastic building product is very strong and seems to wait résistant.Les instructions are very simple. 10 units required, 2 for support of primary and 8 for the summit. I have 6 pieces Trex 2×4 instead of for the summit. (See pictures of colored light table covered with sand Trex.) It was a little difficult to access all bolt heads to get them so everything happens at a slight angle. Also there is a swing slightly from left to right, but nothing bad, and it is very tough when you do eat. It is no flip backwards. The race is perfect. There are some alignment problems, but those costs, who cares. You may not even notice vraiment.Cette thing is heavy. I'm in a windy area, and I know it used to blow plus.Le total cost is approximately $ 90 soutien.Trex with Trex and 2×4 abbreviation costs about $ 16 per room 8ft. I have 3 of eux.Pour $ 90, I doubt I'll find something as big, strong and durable than that. When we finish our furniture, this table will be seated in another part of the bridge.
   Rating: 4 / 5

5. Ann on November 14th, 2009 11:54 am

   I read the reviews before you ensure that it was just so put together, because we are not very experienced with buying tools. It was easy. Our only problem will be involved, recycled wood, my husband. The pieces are just the same, but the plastic hangers were very lenient and always pretty well screwed.
   Rating: 5 / 5

Leave a Reply